2013 STIHL MS 211 C-BE
What do you get when you combine a hardworking chain saw with easy-to-use features? You get the STIHL MS 211 C-BE. This chain saw takes all the low-emission and air-filtration technology of the MS 211 and joins it with two of our most popular comfort features: STIHL Easy2Start™, a system that starts the engine with just a light pull on the cord. Next is our Quick Chain Adjuster, which allows you to adjust the chain without tools. Now you can get power and comfort in one high-tech chain saw. If you’re a homeowner who wants it all, STIHL has heard your call.
STIHL OILOMATIC® Saw Chain. STIHL makes its own saw chain.
Ematic™ Bar includes a polymer ramp reservoir which holds bar oil until it can be picked up by passing chain. This can reduce oil usage by up to 50%.
Bumper Spikes provide better control, making cutting easier.
Spark Arrestor Muffler has large baffles which reduce noise level and contain a screen designed to reduce the emission of sparks.
STIHL Quickstop® Chain Brake System is designed to stop the chain in fractions of a second. Can be manually activated or activated by inertia, if the kickback force is sufficient.
Large Starting Handle is easy to grip.
Front Hand Guard designed to reduce the risk of injury.
Protected Spark Plug – protected, yet easy to change.
Smooth Clean Design has no rough edges to snag on clothing or brush.
Air Filter Cover is easy to remove for fast and easy filter cleaning or replacement.
Master Control Lever™ is a single lever operating the choke, starting throttle lock and on-off switch.
Rear Hand Guard reduces the risk of injury, as well as providing wide area for foot placement during starting.
High-Tech Polymer Housings are lightweight, withstand greater impact, and are corrosion-resistant.
Translucent Fuel Tank allows operator to easily check fuel level before starting work.
Anti-Vibration System helps reduce operator fatigue.
Toolless Fuel and Oil Caps require no tools to open or tighten. Cap retainers help keep cap from being lost.
Low-emission engine technology
Pre-separation air filtration system
Easy2Start™ System (E) reduces the strength and effort needed to start the engine. Available on select occasional use models only.
Quick Chain Adjuster (B) is a toolless chain adjuster
IntelliCarb™ Compensating Carburetor measures air on clean side of air filter and adjusts metering diaphragm in carburetor. Keeps RPM levels even when filter begins to clog.
Carburetor preheat shutter for summer/winter operation
*NOTE: STIHL chain saws have many common features. However, all models may not have all the features shown here. Consult your dealer for details.
Front Handle is designed for a secure grip and ergonomically angled for comfort.
Easy-Access Carburetor Adjustment Screws let you adjust the carburetor for local cutting conditions and altitude.
Decompression Valve makes starting easier.
Electronic Ignition provides easier starting and smoother running.
STIHL Quickstop® Plus Additional Chain Braking Feature (Q) reduces the risk of injury in select circumstances if so equipped.
Purge Pump Primer lets you prime the carburetor without flooding it. Standard on select models.
Replaceable “In Tank” Fuel and Oil Filters lower cost and are easy to maintain.
ElastoStart™ Handle has built-in shock absorber for smoother starting.
Inboard Chain Brake requires less maintenance and makes saw chain sprocket easier to remove.
Automatic Bar and Chain Oiler lets operator concentrate on cutting, not on bar lubrication.
Quick Chain Adjuster (B) is a toolless chain adjuster (Available on select models).
Chain Catcher helps reduce the risk of operator contact by a chain if it should break or derail.
Throttle Trigger Lockout must be depressed before the trigger can be activated.
2013 STIHL MS 211 C-BE
- Fuel Capacity
- 280 cc (9.5 oz.)
- Oil Capacity
- 180 cc (6.1 oz.)
- 35.2 cc (2.2 cu. in.)
- (Power) 1.7 kW (2.3 bhp)
- (Oilomatic®) 3/8" PMC3
- Bar Length
- (Recommended Ranges) 30 to 40 cm (12" to 16") STIHL ROLLOMATIC®
- 4.6 kg (10.1 lbs.)
- NOTE: STIHL recommends #3636 (63 PMC3 55) OILOMATIC® saw chain and 16” 3005 000 4813 Ematic™ guide bar combination.