2013 STIHL TS 420 A (EWC)
STIHL cut-off machines boast many industry-leading features. That’s why STIHL has become the number one selling brand of cut-off machines worldwide. Likewise, the TS 420 A (EWC) raises the standard of wet-cutting performance and boasts a 14” cutting wheel and Electronic Water Control. A conveniently mounted keypad lets you easily control the flow of water with your thumb, letting you keep both hands on the machine. This water control feature is especially important when you are working from a pressure tank and need to improve your control of the water. The EWC feature is smart enough to stop the water flow at idle and remembers your setting when you start working again. And because it’s a STIHL Cutquik® cut-off machine, you can expect fuel efficiency, power and superior comfort.
NOTE: Abrasive wheel included. Diamond wheel (shown) sold separately.
Reduced-Emission Engine Technology - Caring for Nature - The STIHL Inc. “Caring for Nature” seal identifies its powered products that are more environmentally conscious, producing zero or low exhaust emissions. STIHL Inc. defines “low exhaust emissions” as being cleaner than EPA and/or CARB exhaust emission standards.
Electronic Water Control (EWC) - Electronic Water Control allows the operator to easily adjust the flow of water while cutting and stops the water flow when the machine is at idle.
X2 Air Filtration System - The X2 Air Filtration System revolutionizes the cut-off machine industry by allowing air filters to last up to a year, based on cutting conditions. Outside air enters the system in a swirling motion, removing 80% of dust particles. This pre-cleaned air is then routed through the primary and secondary air filters before being sent into the engine. The X2 Air Filtration System is virtually maintenance free and maintains an incredible 99.96% cleaning efficiency.
Anti-Vibration System - STIHL has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
Semi-Automatic Belt Tensioning - With consistent, semi-automatic re-tensioning, this feature increases the service life of the belts and shaft bearings.
Ergonomic Grip - The ergonomic top-handle bar design provides an optimal comfortable grip in any working position
IntelliCarb™ Compensating Carburetor - The IntelliCarb™ Compensating Carburetor is designed to automatically adjust the air/fuel ratio when the air filter becomes restricted or partially clogged and maintains the engine’s correct RPM. IntelliCarb™ uses air from the clean side of the air filter to control the diaphragm and flow of fuel. As the air filter becomes dirty and less air is available for the carburetor, the IntelliCarb™ system adjusts the fuel flow to compensate for the decrease in air flow. This is in contrast to typical carburetors that utilize this air from the “dirty” side of the air box.
Decompression Valve - The decompression valve reduces the compression in the combustion chamber during cranking and helps reduce the effort needed to pull the starter rope.
2013 STIHL TS 420 A (EWC)
- 66.7 cc (4.07 cu. in.)
- Power Level
- 3.2 kW (4.4 bhp)
- Fuel Capacity
- 710 cc (24 oz.)
- 9,000 rpm (Elec. Gov.)
- 350 mm (14 in.)
- Cutting Depth
- 125 mm (4.9 in.)
- (Speed) 5,350 rpm
- (Weight includes water attachment and guard) 10.1 kg (22.3 lbs.)