2013 STIHL TS 500i

<< Back to 2013 STIHL Construction Tools

2013 STIHL TS 500i

Abrasive cutting just got more cutting-edge. STIHL introduces another industry first with the TS 500i STIHL Cutquik® cut-off machine – the first handheld outdoor power tool to offer an electronically controlled fuel-injection system. This system increases power and performance over 15% while remaining lightweight and well-balanced. The fuel injection system makes starting easier and more reliable by eliminating the choke. Just set the switch to on, prime and pull.

Balanced, lightweight, powerful and fuel-injected, this 14” cut-off machine is designed for superior balance and handling during your toughest jobs. And just like a powerful sports car, you will be impressed with the amazing acceleration of this machine, getting you back to speed faster than you thought possible. The STIHL TS 500i also features a high-efficiency engine with low exhaust emissions and optimal torque throughout its RPM range. Its Electronic Water Control (EWC) allows for easy water flow adjustment while cutting and its X2 air filtration system maintains an incredible 99.96% cleaning efficiency. This machine has it all, so very little can stand in your way.

NOTE: Abrasive wheel included. Diamond wheel (shown) sold separately.

Features

All

Reduced-Emission Engine Technology - Caring for Nature-The STIHL Inc. “Caring for Nature” seal identifies its powered products that are more environmentally conscious, producing zero or low exhaust emissions. STIHL Inc. defines “low exhaust emissions” as being cleaner than EPA and/or CARB exhaust emission standards.

Electronically Controlled Fuel Injection System-The fuel injection system makes starting easier and more reliable by eliminating the choke. Just set the switch to on, prime and pull.

Electronic Water Control (EWC)-Electronic Water Control allows the operator to easily adjust the flow of water while cutting and stops the water flow when the machine is at idle.

X2 Air Filtration System-The X2 Air Filtration System revolutionizes the cut-off machine industry by allowing air filters to last up to a year, based on cutting conditions. Outside air enters the system in a swirling motion, removing 80% of dust particles. This pre-cleaned air is then routed through the primary and secondary air filters before being sent into the engine. The X2 Air Filtration System is virtually maintenance free and maintains an incredible 99.96% cleaning efficiency.

Anti-Vibration System-STIHL has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.

STIHL ElastoStart™-The ElastoStart™ starter handle is a feature of STIHL. It is a starting grip with a built-in shock absorber that helps reduce the effort when pulling on the starter cord. The ElastoStart™ starter grip noticeably reduces the sudden peak forces (compression) normally felt during cranking. The forces which occur at the grip after the first compression stroke are smoothed out.

Semi-Automatic Belt Tensioning-With consistent, semi-automatic re-tensioning, this feature increases the service life of the belts and shaft bearings.

Ergonomic Grip-The ergonomic top-handle bar design provides an optimal comfortable grip in any working position.

Decompression Valve-The decompression valve reduces the compression in the combustion chamber during cranking and helps reduce the effort needed to pull the starter rope.

2013 STIHL TS 500i

Specifications

Engine

Displacement
72.2 cc (4.41 cu. In.)
Horsepower
3.9 kW (5.2 bhp)
Fuel Capacity
725 cc (24.5 oz.)

Chassis

Wheel
Max. Size-350 mm (14")

Dimensions

Cutting Depth
Max.-125 mm (4.9")
Arbor
Size-20 mm
Speed
9,000 rpm (Elec. Gov.)
Weight
10.2 kg (22.5 lbs.)

General Information

Max Spindle Speed
5,350 rpm

Photos

Request a quote for: 2013 STIHL TS 500i

Estimated Time For Purchase:*
If you see this field, leave it blank:
Characters Remaining

While we attempt to ensure display of current and accurate data, this listing may not reflect the most recent transactions or may reflect occasional data entry errors. All inventory listed is subject to availability and prior sale. Please consult dealership personnel for details. Prices are quoted for the US only and may not include dealer preparation, transportation, taxes, or other applicable charges. Photographs may be representative only and may vary somewhat from the actual items offered for sale.