2013 STIHL TS 480i
The TS 480i STIHL Cutquik® cut-off machine features an electronically controlled fuel-injection system, increasing the power by 17% as compared to the STIHL TS 410.
Powerful, lightweight and well-balanced, the STIHL TS 480i is designed for superior handling during the toughest jobs (maximum wheel size is 12 inches). With low exhaust emissions, the engine provides optimal torque throughout the RPM range and eliminates the need for a choke, simplifying the starting procedure. The standard electronic water control feature allows for easy and efficient water flow adjustment while operating. The X2 air filtration system is virtually maintenance-free and maintains an incredible 99.96% cleaning efficiency.
Reduced-Emission Engine Technology - Caring for Nature - The STIHL Inc. “Caring for Nature” seal identifies its powered products that are more environmentally conscious, producing zero or low exhaust emissions. STIHL Inc. defines “low exhaust emissions” as being cleaner than EPA and/or CARB exhaust emission standards.
Electronically Controlled Fuel Injection System - The fuel injection system makes starting easier and more reliable by eliminating the choke. Just set the switch to on, prime and pull.
Electronic Water Control (EWC) - Electronic Water Control allows the operator to easily adjust the flow of water while cutting and stops the water flow when the machine is at idle.
X2 Air Filtration System - The X2 Air Filtration System revolutionizes the cut-off machine industry by allowing air filters to last up to a year, based on cutting conditions. Outside air enters the system in a swirling motion, removing 80% of dust particles. This pre-cleaned air is then routed through the primary and secondary air filters before being sent into the engine. The X2 Air Filtration System is virtually maintenance free and maintains an incredible 99.96% cleaning efficiency.
Anti-Vibration System - STIHL has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
STIHL ElastoStart™ - The ElastoStart™ starter handle is a feature of STIHL. It is a starting grip with a built-in shock absorber that helps reduce the effort when pulling on the starter cord. The ElastoStart™ starter grip noticeably reduces the sudden peak forces (compression) normally felt during cranking. The forces which occur at the grip after the first compression stroke are smoothed out.
Semi-Automatic Belt Tensioning - With consistent, semi-automatic re-tensioning, this feature increases the service life of the belts and shaft bearings.
Ergonomic Grip - The ergonomic top-handle bar design provides an optimal comfortable grip in any working position
Decompression Valve - The decompression valve reduces the compression in the combustion chamber during cranking and helps reduce the effort needed to pull the starter rope.
2013 STIHL TS 480i
- 72.2 cc (4.41 cu. in.)
- Power Level
- 3.9 kW (5.2 bhp)
- Fuel Capacity
- 725 cc (24.5 oz.)
- 9,000 rpm (Elec. Gov.)
- 300 mm (12")
- Cutting Depth
- 100 mm (3.9")
- 10.0 kg (22.0 lbs.)
- Max Spindle Speed
- 5,350 rpm