2013 STIHL MS 391

<< Back to 2013 STIHL Chain Saws

2013 STIHL MS 391

STIHL engine technology means low fuel consumption, longer run times and reduced emissions in this high-powered chain saw. The MS 391 features our newest engine technology that adds fuel efficiency while reducing emissions as compared to other models. Though equal in weight, the MS 391 is more powerful than the MS 311. Add to that an optimal power-to-weight ratio and you have a chain saw that’s cut out for the big jobs in field, farm and ranch. Felling trees, cutting firewood and cleanup after the storm just got a whole lot easier with the rugged MS 391.

Features

All

Advanced engine technology (Low fuel consumption and reduced emissions/more power)

Pre-separation air filtration system

Advanced anti-vibration system

Toolless fuel and oil caps with retainers

Side-access chain tensioner

lntelliCarb™ compensating carburetor

STIHL OILOMATIC® Saw Chain STIHL makes its own saw chain.

Ematic™ Bar includes a polymer ramp reservoir which holds bar oil until it can be picked up by passing chain. This can reduce oil usage by up to 50%.

Bumper Spikes provide better control, making cutting easier.

Spark Arrestor Muffler has large baffles which reduce noise level and contain a screen designed to reduce the emission of sparks.

STIHL Quickstop® Chain Brake System is designed to stop the chain in fractions of a second. Can be manually activated or activated by inertia, if the kickback force is sufficient.

Front Hand Guard is designed to reduce the risk of injury.

Front Handle is designed for a secure grip and ergonomically angled for comfort.

Protected Spark Plug is protected, yet easy to change.

Large Starting Handle is easy to grip.

Smooth Clean Design has no rough edges to snag on clothing or brush.

Air Filter Cover is easy to remove for fast and easy filter cleaning or replacement.

Master Control Lever™ is a single lever operating the choke, starting throttle lock and on-off switch.

Rear Hand Guard reduces the risk of injury, as well as providing wide area for foot placement during starting.

High-Tech Polymer Housings are lightweight, withstand greater impact, and are corrosion-resistant.

Translucent Fuel Tank allows operator to easily check fuel level before starting work.

Anti-Vibration System helps reduce operator fatigue.

Toolless Fuel and Oil Caps require no tools to open or tighten. Cap retainers help keep cap from being lost.

IntelliCarb™ Compensating Carburetor measures air on clean side of air filter and adjusts metering diaphragm in carburetor. Keeps RPM levels even when filter begins to clog.

Easy-Access Carburetor Adjustment Screws let you adjust the carburetor for local cutting conditions and altitude.

Decompression Valve makes starting easier.

Easy2Start™ System (E) reduces the strength and effort needed to start the engine. Available on select occasional use models only.

Electronic Ignition provides easier starting and smoother running.

STIHL Quickstop® Plus Additional Chain Braking Feature (Q) reduces the risk of injury in select circumstances if so equipped.

Purge Pump Primer lets you prime the carburetor without flooding it. Standard on select models.

Replaceable “In Tank” Fuel and Oil Filters lower cost and are easy to maintain.

ElastoStart™ Handle has built-in shock absorber for smoother starting.

Inboard Chain Brake requires less maintenance and makes saw chain sprocket easier to remove.

Automatic Bar and Chain Oiler lets operator concentrate on cutting, not on bar lubrication.

Quick Chain Adjuster (B) is a toolless chain adjuster (Available on select models).

Chain Catcher helps reduce the risk of operator contact by a chain if it should break or derail.

Throttle Trigger Lockout must be depressed before the trigger can be activated.

*NOTE: STIHL chain saws have many common features. However, all models may not have all the features shown here. Consult your Dealer for details.

2013 STIHL MS 391

Specifications

Engine

Fuel Capacity
600 cc (20.3 oz.)
Oil Capacity
350 cc (11.8 oz.)
Displacement
64.1 cc (3.9 cu. in.)
Engine
(Power) 3.3 kW (4.4 bhp)

Chassis

Chain
3/8" RSC3

Dimensions

Bar Length
(Recommended Range) 40 to 50 cm (16" to 20") STIHL ROLLOMATIC®
Weight
6.4 kg (14.1 lbs.)

General Information

Other
NOTE: STIHL recommends #3624 (33 RSC3 72) OILOMATIC® saw chain and 20" 3003 008 8921 Ematic™ guide bar combination.

Photos

Request a quote for: 2013 STIHL MS 391

Estimated Time For Purchase:*
If you see this field, leave it blank:
Characters Remaining

While we attempt to ensure display of current and accurate data, this listing may not reflect the most recent transactions or may reflect occasional data entry errors. All inventory listed is subject to availability and prior sale. Please consult dealership personnel for details. Prices are quoted for the US only and may not include dealer preparation, transportation, taxes, or other applicable charges. Photographs may be representative only and may vary somewhat from the actual items offered for sale.